Automated block making machines have changed the world. Their ability to help create thousands of different types of blocks has streamlined this entire industry. However, for those that would like to spend less money, and that have laborers that can do more of the work, semiautomatic block making machines will work just as well. However, just like their automated versions, problems can occur which are generally attributed to poor maintenance. Here are some daily maintenance guidelines and procedures for those that own and use semiautomatic block making machines today.
Working Components Of Block Making Machines
There are five specific components that comprise a block making machine. This will include the outside framework which contains everything, the hopper where wet cement(cemento fresco) will be poured in, a hydraulic system, a vibrating system to mix everything, and the kiln where they are solidified. In each of these components, certain problems can arise that can lead to the incapability of the machine functioning. To bypass any of these problems, regular maintenance must be done.
Proper Maintenance Procedures For Block Making Machines
The first place that you will want to look for potential problems is in the hopper itself. Sometimes it can get clogged, causing it to prevent the cement from getting into the molds for the blocks. Another problematic area is the heating unit which may stop from time to time. This is usually an electrical connection(conexión eléctrica). The vibrating system may also have a similar problem, and when using hydraulic systems, daily maintenance is always required. By training two or more people to do this maintenance regularly, you can usually avoid inconsistencies in their production value.
Does This Really Have To Be Done Every Day?
In most cases, daily maintenance is mandated. This is especially true for extremely productive businesses that are using these machines nearly 24 hours a day. Concrete and cement are both liquid, but when working with them on and ongoing basis, this can often spill over into the wrong places. By making sure that the units are clean, and that the electrical components are intact, you should not run into any problems. If you do have a hydraulic issue, such as malfunctioning pistons, or if you have a hydraulic leak, these must be repaired as soon as possible. And AIMIX brick making machines will be your best choice.
Daily maintenance on any piece of industrial equipment is recommended, and this is very true with block making machines. When you are trying to provide this maintenance for semi automated block making machines, you actually have a better chance of catching the problems. That is because you have more individuals that will be participating in the process and they can be trained on what to look for. Problems can be addressed almost immediately because of the constant preoccupation that these workers will have as their helping to produce thousands of blocks your company on a daily basis. By having hoses, tools, and replacement components available, breakdowns will be repaired in a very short period of time. These are certainly a good investment, and can last for many years, if properly maintained.
Find more info: https://aimixgrupo.com.mx/maquina-para-hacer-bloques/